Hot water meter MTWD-M-ST and MTWD-N-ST

Multi-jet dry dial meter for hot water with flood-proof (IP68) hermetically sealed glass/copper register in a standpipe design

The current state of development of the MTWD-M-CC-ST guarantees the most precise measurement results, minimal bearing load and a long service life.

The MTWD-M-CC-ST is ideally suited to measuring tasks at temperatures up to 90 °C and fits perfectly into all installation locations provided for standpipe meters. By using special materials, outstanding measurement readings can be combined with a high maximum temperature. The register of the ST variants also works in horizontal position.

The meter is equipped with an 8-digit glass/copper register (IP68) and a modulator disc. This enables electronic, non-reactive scanning and is the basis for remote reading of meter data via radio with LoRaWAN® or wM-Bus. A combined M-Bus/pulse module is also possible.

Mehr zum Produkt

Produktbilder

Hot water meter MTWD-ST in a standpipe design
Hot water meter MTWD-ST in a standpipe design

Informationen

Hot water meter MTWD-M-ST and MTWD-N-ST
Downloads

Leistungsmerkmale

  • Multi-jet dry dial meter with shielded magnetic coupling
  • Water meter for standpipe installation
  • Equipped with glass/copper register (IP68) as standard
  • Brass body according to Federal Environment Office (UBA) list
  • Register rotatable 355°
  • Operating pressure MAP 16
  • Approved in accordance with MID

Anwendung

For the consumption measurement of hot and clean drinking water or service water up to 90 °C

AMR Technologien

  • As standard with communication interface for EDC modules (Electronic Data Capture):
    • EDC LPWAN radio module (868 MHz) for LoRaWAN®
    • EDC wireless M-Bus radio module
    • EDC- combined M-Bus and pulse module

Produkteigenschaften

Measuring Principle
  • Multi-Jet Meters
Register
  • Dry Dial
  • Dry Dial protection class IP 68 ("Copper Can")
Housing Material
  • Brass
Nominal Flow Q3 (≈ Qn)
  • Q3=6 (≈ Qn 3,5)
  • Q3=10 (≈ Qn 6)
  • Q3=16 (≈ Qn 10)
  • Q3=4 (≈ Qn 2,5)
Nominal Diameter DN (mm)
  • DN 20
  • DN 25
  • DN 40
Nominal Diameter (inch)
  • 3/4"
  • 1"
  • 1 1/2"
Length without connectors
  • 105 mm
  • 150 mm
  • 200 mm
Metrological Class horizontal (max.)
  • R 80
Metrological Class vertical (max.)
  • R 40
Communication Technologies
  • Combined M-Bus and pulse module
  • Radio via LoRaWAN®
  • Radio via wireless M-Bus
  • Electronic Pulser
  • Reed Pulser
  • M-Bus
Temperature
  • Hot water up to 90 °C
Operating pressure (max.)
  • MAP 16
Additional Options
  • Copper Can (IP 68)
  • Modulator Disc for inductive sensors
Specified Units on Display
  • Cubic Meters (m³)

Downloads

Um PDF Dateien zu betrachten, benötigen Sie einen PDF Viewer, den Sie auf acrobat.adobe.com herunterladen können.

Weitere ZENNER Produkte

Entdecken Sie weitere interessante Produkte in unserem Sortiment.

Product imageWater meters MTKD-M-ST AND MTKD-N-STWater meters MTKD-M-ST AND MTKD-N-ST
Water meters MTKD-M-ST AND MTKD-N-ST
The MTKD-ST is a multi-jet dry dial meter for cold water in a standpipe design. MTKD-M-ST is equipped with an 8-digit dry dial meter register and a modulator disc. This enables ...
Information
Product imageHot water meter MTWD-M-CC and MTWD-NHot water meter MTWD-M-CC and MTWD-N
Hot water meter MTWD-M-CC and MTWD-N
MTWD-N is a multi-jet dry dial meter for hot water with flood-proof (IP68) hermetically sealed glass/copper register
Information