Residential water meter MNK-L-RP

Multi-jet semi-dry-dial meter for cold water

MNK-L-RP-N is a MID-compliant water meter for service connection. The current state of development guarantees the most precise measurement results, minimal bearing load and a long service life.

The meter is equipped with a reed switch interface as standard. The interface enables remote reading of the meter data via PDC radio module with LoRaWAN® or wM-Bus (according to DIN EN 13757-4).

The rollers of the MNK-L-RP-N are protected in a separate chamber that is filled with a special protective liquid. This means that the rollers can always be read even when the water is very dirty.

The housing of the MNK-L-RP-N is made of glass-fibre reinforced polymer plastic, drinking water approved and able for an operating pressure up to 16 bar.

Mehr anzeigen
Mehr zum Produkt

Produktbilder

Multi-Jet Plastic Water Meter MNK-L-RP-N
Multi-Jet Plastic Water Meter MNK-L-RP-N

Informationen

Residential water meter MNK-L-RP
Downloads

Leistungsmerkmale

  • Multi-jet semi-dry-dial meter
  • For horizontal and vertical installation
  • Register cap made of UV-resistant plastic
  • Housing made of glass-fibre reinforced polymer plastic
  • Around 50% lighter than a comparable meter with brass housing
  • Operating pressure MAP 16
  • Approved in accordance with MID

Anwendung

  • For the consumption measurement of cold and clean drinking water or service water up to 50 °C

AMR Technologien

  • Serially equipped with communication interface for PDC-module (PulseDataCapture):
    • PDC-wireless M-Bus radio module according to DIN EN 13757-4
    • PDC- LPWAN-Radio module for LoRaWAN®
  • Retrofittable with pulser
    • Standard resolution 10 l/pulse
    • Optional 100 l/pulse

Produkteigenschaften

Measuring Principle
  • Multi-Jet Meters
Register
  • Wet Dial with protected Rollers
Housing Material
  • Polymer
Nominal Flow Q3 (≈ Qn)
  • Q3=2,5 (≈ Qn 1,5)
  • Q3=4 (≈ Qn 2,5)
Nominal Diameter DN (mm)
  • DN 15
  • DN 20
Nominal Diameter (inch)
  • 1/2"
  • 3/4"
Length without connectors
  • 165 mm
  • 190 mm
Metrological Class horizontal (max.)
  • R 100
Communication Technologies
  • Reed Pulser
Temperature
  • Cold water up to 50 °C
Operating pressure (max.)
  • MAP 10
Specified Units on Display
  • Cubic Meters (m³)

Downloads

Um PDF Dateien zu betrachten, benötigen Sie einen PDF Viewer, den Sie auf acrobat.adobe.com herunterladen können.

Weitere ZENNER Produkte

Entdecken Sie weitere interessante Produkte in unserem Sortiment.

Product imageWater Meters ETKD-L with polymer plastic housingWater Meters ETKD-L with polymer plastic housing
Water Meters ETKD-L with polymer plastic housing
ETKD-L is a Single-Jet Meter in a polymer plastic housing, designed for recycling. The new EKTD-L has a counter with a shielded magnetic coupling which delivers virtually perfect ...
Information
Product imageResidential Water Meter MNK-L/MNK-L-NResidential Water Meter MNK-L/MNK-L-N
Residential Water Meter MNK-L/MNK-L-N
Multi-Jet Plastic Water Meter MNK-L-N is a further development of the MNK. MNK-L-N is retrofittable with pulser (reed) or PDC communication module for remote readout via ...
Information
Product imagePiston Type Water Meter RNK-L-RP-NPiston Type Water Meter RNK-L-RP-N
Piston Type Water Meter RNK-L-RP-N
Volumetric Piston Meter RNK-L-RP-N is a water meter for cold potable water with protected dial and composite housing. RNK-L-RP-N is equipped with pulser (Reed) for remote readout.
Information